FLOW OVER WEIRS
Flow Over Weirs: MTFM-20
The Flow over Weirs consists of five basic elements used in conjunction with the flow channel in the molded bench top of the Hydraulics Bench. A quick-release connector in the base of the channel is unscrewed and a delivery nozzle screwed in its place. A stilling baffle locates into slots in the walls of the channel.
The combination of the inlet nozzle and stilling baffle promote smooth flow conditions in the channel. A Vernier hook and point gauge is mounted on an instrument carrier which is located on the side channels of the molded top.
The carrier may be moved along the channels to the required measurement position. The rectangular notch weir or V notch weir to be tested is clamped to the weir carrier in the channel by thumb nuts. The stainless steel weir plates incorporate captive studs to aid assembly.
DEMONSTRATION CAPABILITIES:-
- Demonstrating the characteristics of flow over a rectangular notch
- Demonstrating the characteristics of flow over a V notch
- Determining the coefficient of discharge
- TECHNICAL SPECIFICATIONS:-
- Two stainless steel weir plates to fit in channel of Hydraulics Bench
- Vernier hook and point gauge with carrier
- Stilling baffle
- Educational software available as an option
- Angle of V notch weir: 90° inclusive
- Hook & point gauge range: 0-150mm
- Accuracy: 1mm
** Note: The content of the product and specification are subject to change without prior notice for continuous improvement. Images shown are for representation purpose only. “MICROTEKNIK” keeps the right to modify the content in the product without prior notice.
Latest Products
