SOIL PERMEABILITY APPARATUS
Soil Permeability Apparatus: MTST-33
The apparatus is used for the laboratory determination of permeability of soils using a constant or a variable head. This test is recommended for soils with co-efficient of permeability in the range of 10 x -3 to 10 x -7cm/sec. The maximum particle size of the soil which can be tested in the mould is 10 mm.
Technical Specification:-
- Consists of gunmetal mould 100mm dia X 127.3mm height X 1000ml volume, with collar of 100mm dia X 60mm high and drainage base plate
- Drainage cap, Metallic clamping ring, two porous stone for base and cap
- Dummy plate, air release valve with a set of three glass stand pipes approx.6mm, 10mm, and 20mm dia X 1 meter length mounted on a wooden board, the end of the glass tube is serrated to connect rubber tube of 3 meter length with pinch cock.
- Material for Construction Stainless steel
- Gun metal Drainage base plate with a recess for a porous stone and with an outlet valve.
- Metallic clamping ring.
- Gun metal drainage cap (top plate with a recess for a porous stone and fitted with an inlet valve and an air release valve.)
- Gun metal dummy plate to serve as a false bottom during compaction. Porous stone for drainage cap.
- Porous stone for base plate. Set of glass stand pipes approximately 6 mm dia., 10 mm dia and 20 mm dia mounted on a wooden board.
- Each glass tube is longer than 1 meter and has a serrested end at the bottom.
- To read water head 2 Nos. meter scales are fixed between the tubes.
- A length of 3 meter long rubber tubing with pinch cock is also supplied.
** Note:-The content of the product and specification are subject to change without prior notice for continuous improvement. Images shown are for representation purpose only. “MICROTEKNIK” keeps the right to modify the content in the product without prior notice.
Latest Products
