Pharmaceutical Equipments

P-A4 : Black & White screen fitted on a base board with light arrangement. An adjustable side-arm has been provided with clamp for holding a magnifier for easy and magnified viewing during process.

P-A5 : Pan made of stainless steel 6 Nos. Nozzles made from brass richly chrome plated and tap to connect water from out side.

P-A6 : The antibiotic zone reader provides a rapid accurate method for determining the strength of antibiotic materials by measuring the diameter of an inhibited zone in petri dish.
This zone reader measures the diameter of the inhibited zone to 0.02mm. with the range of 0 to 35mm. work on 230volts A.C. 50 C/S.

P-A7 : Particle size Determination apparatus, (Sedimentation pipette, Andrerson) consisting of 500ml. graduated cylinder, graduation from 0 to 20cm. and fitted with 10rnI. pipette with three way stopcock, the tip of pipette at the level of 0 mark at the cylinder.

P-B4 : Portable, hand Operated equipment with two extra cap holders of different sizes.

PB-10 : Totally casted machine hand operated.

P-B5 : Electrically operated with speed control device with two Stainless steel jars of different sizes.

P-B6 : Electrically operated, motor driven made of stainless steel.
Capacity : 1 lit., 2 lit., 5 lit. Mill made of stainless steel.

P-C8 :

P-B7 : To determine the density of the powder graduated cylinder holded in clamps moves through motor up and down direction at a frequency rate between 28/32 cycles per minute through a distance of 5-6 cms. which strikes on a cushion fitted on the plateform. A timer is provided to set the duration.

P-B7A : With digital preset revolution counter. The instrument will stop after setted revolutions.

P-B8 : Washing Tank made of stainless steel mounted on strudy square MS pipe frame duly powder coated, motorised driven unit embedded in a metalic box rested on the main unit with a drill check to accomodate various size of washing brushes. Workable on 220V 50 Hz AC mains.

P-B9 : A sturdy and heavy unit made of CRC sheet mounted on a heavy angle iron duly powder coated. Capacity of output of water is adjustable through cam system knob provided from 50 ml. to 300 ml.
(a) Hand operated
(b) Motorised (Semi Automatic)

P-C2 : Stainless Steel jar on stand. Capacity : 500ml, 1 lit., 2 lit.

P-C3 : Stroke type machine. Filling capacity adjustable 5gm to 50gm. Detachable nozzles provided for each capacity. Hooper and contact parts made of stainless steel.

P-C4 : A compact hand operated machine suitable to fill two-part hard gelatine capsules No. 0, 1 & 2 by interchangeable plates. Main body made of heavy cast iron and all contact parts made of Brass richly plated or stainless steel. Handle locking arrangment makes the operator to lift the loading plate without fear of damaging the capsules. Pressing is achieved by cam system which also saves time to press the plunger as compared to screw system. Plate of stainless steel for any one No. is supplied with machine.For filling 100 or 200 capsules.
Optional : Plates of other Nos. supplied, on demand.

P-C5 : Made from Borosilicate Glass :
(i) Arterial (ii) venous
(iii) Syme’s Perfusion (iv) T-Shaped