Ductility Testing Machine Refrigerated

Ductility Testing Machine-Refrigerated: MTBA -13A

It may be defined as the system and micro-processor based digital temperature controller as distance in cm s to which a standard briquette of bitumen can be stretched before the thread breaks. The briquette is stretched at a rate of 50 mm/min.± 2.5mm per minute at a temperature of 27°C ± 0.5°C The Machine is having built in refrigeration system to work a below ambient temperature up to 10°C in tropical conditions. The Machine will operate at 27°C with control accuracy of ± 0.5°C as per the requirement of IS.

Features:-

Cost effective
Optimum performance
High efficiency
Operated through electric current
Consistent speed
Refrigeration system and micro-processor based digital temperature controller
Highly reliable
Refrigeration system and micro-processor based digital temperature controller
A heater with is fitted inside the water bath
Water bath inside is of stainless steel with insulation and water drain cock
The motor and gears to rotate the shaft are housed in a cabinet fixed above the other end of the bath
Compact design

Description

Technical Specification:-

A pointer fixed to the carrier moves over
A scale graduated from 0-100 cm x 1mm fixed on the bath with “0” (Zero) of the scale towards the fixed plates side.
The rotating shaft has 2 speeds of travel for the bracket, 5 cm/mainland 1cm/min. selected by a clutch.
Water bath inside is of stainless steel with insulation and water drain cock.
A heater with is fitted inside the water bath. The Temp. Is controlled by dual display Microprocessor based Auto Tuning PID Digital Temp.
Indicator cum controller.
Control switches for motor, stirrer, heater and indicator lamps are fixed at a convenient place on the water bath
Complete with three briquette moulds and one base plate, all supply single phase.

Accessories:-

Base plate
Briquette moulds

** Note:-The content of the product and specification are subject to change without prior notice for continuous improvement. Images shown are for representation purpose only. “MICROTEKNIK “keeps the right to modify the content in the product without prior notice.