Kinematic Viscosity Bath

Kinematic Viscosity Bath: MTBA -17

This test is carried out utilizing the Capillary viscometer for kinematic viscosity at 135 degree C and procedure has been carried out according to Measurement was taken to within 0.1 s the time required for the leading edge of the meniscus to pass between successive pairs of timing marks. The resistance to flow under gravity and to pass those timing marks inside the tube has been reported as kinematic viscosity of that sample. The first flow time was reported which exceeds 60 s between a pair of timing marks, noting the identification of the pair of timing marks.

Features:-

Standards available with and without refrigeration
Over temperature & low bath level protection Can accommodate 2, 6 & 8 viscometers
High grade stainless steel inner chamber Digital temperature controller
High accuracy temperature control with dual digital displays show set point and actual bath temperature with selectable scale (°C or °F)
Stand alone feature provides for automated testing without an external PC
Integrated redundant over temperature and low liquid level cut-off circuitry
Integrated digital timing for easy measurement of sample efflux times
Immersion electric heater.
Constant speed Pump cum stirrer.
Electric motor with gear mechanism.
Stainless steel scale and pointer.
Frost free glass window for ultra-low temperature bath
Meets Requirements for Temperature Stability
Maintains uniform temperature all around the bath
Dual digital displays show set and actual bath temperature

Description

Technical Specification:-

Inner Size 12 x 9 x 12 Inch
Temperature Range 5°C above ambient to 150°C
Temperature sensor PT-100
Temp. Controller PID Temp Controller w/ Accuracy ±0.5°C
Construction Inner chamber: SS 304 /316 (Outer chamber: MS powder coated) (Insulation: Glass wool) (Window: 2 side toughened glass windows) (Light: 1 tube light)
Heating System Heating by tubular Heater vertically fitted in side chamber (2.0 K.W)
Stirring by S.S. shaft fitted with Motor
Power 230 Volts 50 Hz
Automatic calculation and display of results in viscosity units or seconds
Accommodates Ubbelohde, Cannon Fenske, and Reverse Flow viscometers

Accessories:-

Spare Viscometer Holder
Electronic Stop Watch
Stop Clock Table Model
Lighting attachment

** Note:-The content of the product and specification are subject to change without prior notice for continuous improvement. Images shown are for representation purpose only. “MICROTEKNIK” keeps the right to modify the content in the product without prior notice.