MUNICIPAL SOLID WASTE INCINERATOR

MUNICIPAL SOLID WASTE INCINERATOR : JKA-230MW

Municipal waste incineration is the most advanced level of the waste disposal / treatment hierarchy: indiscriminate dumping, controlled dumping, landfilling, sanitary landfilling, and mechanical treatment. Solid waste arises from human activities- Domestic commercial, Industrial, agricultural, wastewater treatment, and so on.

Incineration system provides an effective means of reducing the volume of Municipal solid. Produced steam can be used purpose of heating or power generation. Municipal solid waste incinerator is turned waste into ash and combustible gases at 1000°C in primary chamber The temperature is raised to 1100°C for at least 2 seconds to incinerate the wastes with a content of more than 1% of halogenated organic substances. The incinerator reduces most combustible solid waste to nearly 2-3 percent by volume and 5 percent by weight.

CONTROL

Fully automatic sequential control provided by internal PLC system providing control of:

Primary Chamber
Secondary chamber pre-heat
burn cycle (variable)
cool down cycle

Primary Chamber:

Fully insulated internal refractory lining, constructed from high grade refractory brick ensuring a self-supporting interlocked arrangement.
Manually operated, access lid.
Waste ignition burner, temperature controlled on-off, complete with internal air fans
A pre-cast blocks impact zone that protects the refractory lining when loading.

Secondary Chamber:

Fully insulated internal refractory lining, constructed from high grade low thermal mass insulation.
Secondary chamber burnout burner, temperature controlled on-off, complete with internal air fans.
Integrated combustion burner air fans with automatically controlled distribution to their designated area.
Temperature sensor mounting point of the chamber ensuring the chamber reaches the necessary 850°C minimum.

FUEL OPTIONS

Electrical
Diesel
LPG
Natural Gas

TEMPERATURES

Main chamber: 750°C – can reach in excess of 1000°C*
Secondary chamber: 850°C – 1100°C*

BURNERS

Fully automatic, high-efficiency burners with electronic ignition, flame recognition and combustion control devices fitted.

CONSTRUCTION

Steel welded fabrication consisting of sheet steel and structural section supports.

ASH REMOVAL

Easy and safe manual ash removal from the primary chamber.

Description

Features:

Primary Chamber with Fully Automatic Burner Assembly (With Fire Proof Bricks Lining)
Secondary Chamber with Automatic Burner (With Fire Proof Bricks Lining)
Automatic Waste Feeding System.
Burners of the incinerators are CE certified high efficiency. They are fully automatic and well equipped with safety devices like Flame Failure Protection Device etc.
Venture Scrubber with Shower for wet scrubbing.
ID Fan
Chimney with Ladder, Platform & Sampling point
Duct Line with Inside Lining
Heavy Construction for Long Life
Incineration as per Emission Standard
Combustion efficiency of 99%.

Facility Including:

Primary Chamber
Combustion requirements
Combustion control
Air pollution control devices
Anticipated air emission levels
Noise control
Monitoring
Ash management

Type of Waste:

1. Domestic Waste: Waste from household activities, including food preparation, cleaning, fuel burning, old clothes and furniture, obsolete utensils and equipments, packaging, newsprint, garden wastes etc.

2. Street Sweepings: The waste is dominated by dust and soil together with varying amounts of paper, metal, and other litter from the streets. In lower-income cities, street seeping may also include drain cleanings and domestic waste dumped along the roads, plant remains, and animal manure.

3. Construction and demolition Waste: The composition of the waste depends on the type of wood, packaging materials, and the like.

** Note:-The content of the product and specification are subject to change without prior notice for continuous improvement.