Educational 5 15

JKA-231 : Made of transparent acrylic sheet, chemically welded to make it perfectly leak-proof. Capacity of bath 750 ml. Complete with uprights, organ & oxygen tubes, capillary tubing, frontal lever. Temperature by immersion heater controlled by a Thermostat.
Chamber Size : 8" x 5" x 5"

JKA-245 : Versatile and complete organ baths. Bath chambers made out of thick Transparent acrylic sheets, chemically welded to make them leak-proof. The chamber is measureing 12x9x8" (Depth) and is fitted on a metallic stand.
Temperature is achieved by 250 Watts heating elements and is thermostatically controlled. A suitable covered motor with propeller is suspended from top and clamped on to the bath wall with a support on metallic frame ensuring vibration-free operation.
A compact control penal has been provided with independent switch for mains, stirrer and heater. The Neon lamp shall glow when the heater is on.
Supplied complete with two sets of glass inner vessels, oxygen tubes, Warming coils, fixit levers and holders. This bath is termed as TWO-UNIT ISOLATED BATH. The unit is workable on 220V AC 50Hz single phase.

JKA-246 : Specifications as above but with stirring unit

JKA-246A : Same as Two Unit Isolated Bath but with four sets of glass inner vessels. Oxygen tubes, warning coils, fixit levers and holders.

JKA-247 : (for isolated mammalian heart with dual Perfusion system.)
The unit mounted on a heavy iron base measuring 27x12". Two main uprights hold the equipment. Various parts of assembly are adjustable.
Two unit Isolated Bath with central glass spiral through which the fluid passes is electrically heated and temp. is thermostatically controlled. Two light weight pullys are used to direct a thread from heart to lever.
Bath assembly complete with support, bottles, outlet chamber,oxygen tubes ,cannulae, heart lever and rubber tube. A manometer is provided which is adjustable vertically as well as horizontally.
The unit is complete in all respects with accessories required for various experiments.

JKA-248 : A versatile assembly serving both for heart perfusion and as on all-purpose thermostatic organ bath. The transparent perspex bath is 12"x9"x8" and rests on a metal stand: a 1"x3/8" thick edge at the top makes clamps etc. carrying the uprights and Temperature of the bath is regulated (CONSTANT). Thermostatic sensitivity 2C. The stirrer unit is completely independent, and dips into the bath in one corner, and fixes on its special stainless steel upright. A perspex connection box is fitted to the bath frame, and carries all the electric leads and connections. Two pilot lamps indicate the thermostat and stirrer operation. Extra accessories to enable the unit to be used as an all-purpose organ bath (2 unit) are:-
a) Double set of glass inner vessels.
b) Oxygen tubes.
c) Warming coils.
d) Levers with stainless steel capillary.
e) Four uprights with boss heads.
f) X blocks.
Complete assembly with upright stand, double reservoir, mercury manometer.

JKA-271 : On vulcanite base with table clamp.

JKA-272 : On vulcanite base.

JKA-281 : On a teak wood base with graduated scale. Primary coil with 300 turns and Secondary with 7500 tuns with Helmholtz modification of neef hammer and heavy duty platinum contacts.

JKA-282 : On teakwood base with graducated scale. Primary coil with 300 turns and secondary with 6500 turns. Interrupter working directly off the iron core. Complete with heavy duty contacts.

JKA-283 :

JKA-284 : Complete unit on two stands. Mercury cup and magnet.

JKA-285 :

JKA-286 :

JKA-287 :